Procom CXL 70-5HD-...-PT Manuel d'utilisateur télécharger pdf

CXL 70-5HD/...-PT

Sturdy, 5 dBd, Omnidirectional Base Station Antenna for the

TETRA Bands

DESCRIPTION

CXL 70-5HD/…-PT is an 5 dBd, vertically polarized, omnidirectional base

station antenna for the TETRA bands.

The antenna has a band width of 20 MHz.

The antenna has been approved to withstand lightning (10/350 μs

impulses/100 kA) according to EN 61643-11, VDE 0855-300 and VDE

0185-305-114 in FH-Kiel Laboratory in Germany.

The antenna is provided with our sturdy type “HD” mast mount, which is

a heavy-duty, multipurpose mounting bracket made of non-corrosive

aluminium. The accompanying U-bolts and fittings are made of stainless

steel.

The antenna can be mounted on mast tubes of 58 to 105 mm in outer

diameter. Further, the construction of the mount makes it possible to

lead the cable either along the inside or on the outside of the mast tube.

The antenna element is sealed in a high-quality, conical glass fibre tube

with low wind-load, which will ensure performance undisturbed in all

climates.

To substantially reduce noise caused by atmospherical discharges, all

metal parts in the antenna are DC-grounded. Consequently, the antenna

shows a DC-short across the coaxial cable.

CXL 70-5HD/…-PT is a vibration-proof, slim-line, corrosion-resistant,

modern style base station antenna.

ORDERING DESIGNATIONS

TYPE PRODUCT NO. FREQUENCY

CXL 70-5HD/l-PT 100000237 380 - 400 MHz

CXL 70-5HD/h-PT 100000232 410 - 430 MHz

SPECIFICATIONS

ELECTRICAL

MODEL CXL 70-5HD/...-PT

ANTENNA TYPE High-gain collinear

FREQUENCY 380 - 400 MHz and 410 - 430 MHz

IMPEDANCE Nom. 50 Ω

RADIATION Omnidirectional

POLARIZATION Vertical

GAIN 7 dBi 5 dBd

HALF POWER

BEAMWIDTH

15°

BANDWIDTH 20 MHz

SWR ≤ 1.5

MAX. POWER 250 W

ANTISTATIC

PROTECTION

All metal parts DC-grounded

(Connector shows a DC-short)

MECHANICAL

TEMP. RANGE -30°C → +70°C

CONNECTOR N-female

WIND SURFACE 0.21 m²

WIND LOAD 274 N @ 160 km/h

WIND VELOCITY Tested to 200 km/h

COLOUR Marine white

MATERIALS Radome: Polyurethane-coated glass fibre

Mounting bracket: Seawater resistant aluminium,

polyester coated

TOTAL HEIGHT Approx. 3.2 m

WEIGHT Approx. 6 kg

MOUNTING On 58 - 105 mm dia. mast tube

MULTI-PURPOSE MOUNTING BRACKET

PLEASE NOTE

When using the CXL 70-5HD/…-PT at windy locations where wind speeds of

more than 150 km/h can be expected, the antenna must be mounted on the

side of the mast and the top section of the glass fibre tube stabilized with a

bracket.

1 2

Résumé du contenu

Page 1 - CXL 70-5HD/...-PT

CXL 70-5HD/...-PTSturdy, 5 dBd, Omnidirectional Base Station Antenna for theTETRA BandsDESCRIPTIONCXL 70-5HD/…-PT is an 5 dBd, vertically polarized, o

Page 2 - TYPICAL GAIN AND SWR CURVES

TYPICAL GAIN AND SWR CURVESTYPICAL RADIATION PATTERN (E-PLANE)TYPICAL RADIATION PATTERN (H-PLANE)PROCOM A/S reserve the right to amend specificationsw

Commentaires sur ces manuels

Pas de commentaire

Procom CXL 70-5HD-...-PT Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires de communication Procom CXL 70-5HD-...-PT. Procom CXL 70-5HD-...-PT User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires de communication Procom CXL 70-5HD-...-PT