Triplexer for simultaneous operation of two mobile telephones and car
radio on a common mobile telephone antenna.
Excellent coverage of the two bands 144 – 175 MHz and 880 – 2300
MHz.
Extremely small dimensions.
Quick installation using dual-adhesive pad provided.
FME-connections on antenna and transceiver terminals
CRC (M10 x 0.75) connection on the car radio terminal.
1 m or 5 m Procom 75 Ohm car radio cable available as an option.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
TRI 2/900/1800/UMTS/FM 200000792
SPECIFICATIONS
ELECTRICAL
MODEL TRI 2/900/1800/UMTS/FM
FREQUENCY Mobile telephone 1 : 144 – 175 MHz (COM1)
Mobile telephone 2 : 880 – 2300 MHz (COM2)
Car radio : 0 – 108 MHz (RADIO)
MAX. INPUT POWER 35 W mobile telephone
INSERTION LOSS 0 – 108 MHz : ≤ 1.5 dB
144 – 175 MHz : ≤ 1.0 dB
880 – 2300 MHz : ≤ 0.7 dB
ISOLATION COM1 to COM2 ≥ 40 dB
COM1 to car radio ≥ 35 dB
COM2 to car radio ≥ 40 dB
IMPEDANCE Transceivers : 50 Ω
Car radio : 75 Ω
MECHANICAL
TEMP. RANGE –30° C → +70° C
CONNECTORS COM1, COM2, Antenna: FME
Car radio: CRC-Connector (M10 x 0.75)
DIMENSIONS (W x H x D) 50 x 21 x 60 mm
WEIGHT Approx. 68 g
ACCESSORIES Car radio cable
Type 1 m CRC (length 1 m)
Type 5 m CRC (length 5 m)
TYPICAL RESPONSE CURVES
INSTALLATION NOTES
The 50 Ω cable between antenna and diplexer should be kept as
1.
short as possible (preferably not more than 1 m).
Some communication antennas have insufficient height to ensure
2.
satisfactory broadcast reception. Only antenna whips with a height of
at least 25 cm are acceptable.
Tuning: The antenna is tuned for best SWR at the operating
3.
frequency as usual. The filter is factory-tuned and ready for
installation.
Commentaires sur ces manuels