Procom NAV6 Manuel d'utilisateur télécharger pdf

ICS

Technical Information Nav6 Computer Interface Instruction Sheet

22/03/2002 MAN3035.00.DOC 1

Using the Nav6 Computer Interface Cable

Equipment required:

Nav6 Computer Interface Cable (6020.09)

PC (minimum specification : COM1 RS232 port, running “Windows HyperTerminal”, “Procomm

Plus” or a similar application)

Note that this instruction sheet contains an expanded version of the instructions contained within the Nav6 User

Manual 3008.00.

Connecting a Nav6 to a PC

The Nav6 can be setup to output NAVTEX messages and/or logged NMEA data to a PC.

Follow these steps to enable communication between your Nav6 and a PC :

• Connect the interface cable to the PC’s RS232 port (usually COM1) & wire it into your Nav6 display as

follows :

Computer Interface cable colour Nav6 Lead cable colour Signal name

Brown Brown RX

White (with black sleeve) Black (paired with brown) TX

Black Black (paired with red) 0V

Note : if you have a Nav6hub then follow the wiring instructions contained in the Nav6hub User Manual

instead.

• Start up your terminal emulation application (“Windows HyperTerminal”, “Procomm Plus” or a similar

application)

• Set the serial port to 4800 baud, 8 data bits, 1 stop bit, no parity

• Test the connection by setting “manual print” to “On” and set the output format to “Data” ( Setup Mode,

NAVTEX View, Options Page) and transmitting a NAVTEX message to the PC by pressing the

softkey on the NAVTEX Mode, Print View

Printing NAVTEX messages

• Set NAVTEX “auto print” to “On” (Setup Mode, NAVTEX View, Options Page)

• Set the NAVTEX output format to “Data” (Setup Mode, NAVTEX View, Options Page)

• Set the NAVTEX print filtering to select which message types from which stations should be transmitted to

the PC (Setup Mode, NAVTEX View, Options Page, Print Setup)

Auto printing of NAVTEX messages should now occur when new NAVTEX message transmissions are received

from the selected stations

Printing NMEA logged data at a fixed interval of time

• Set Navigate “auto print” to “On” and set the logging interval (Setup Mode, Navigate View, Options Page)

Auto printing of Navigation logs will now occur at the chosen Navigate logging interval.

Printing the Navigation log

• Set Navigate “manual print” to “On” if you want to be able to print the current page of log entries from the

navigation log using the

PRINT softkey on the Navigate Mode, Log View

Brown Brown RX 1

Résumé du contenu

Page 1 - Brown Brown RX

ICSTechnical Information Nav6 Computer Interface Instruction Sheet22/03/2002 MAN3035.00.DOC 1Using the Nav6 Computer Interface CableEquipment required

Commentaires sur ces manuels

Pas de commentaire

Procom NAV6 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non Procom NAV6. Procom Nav6 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Procom NAV6